Ölprotektor.de
10
Platform
Apply an oil and water repellant sealing
compound to the underside of the plat-
form (e.g. Silicone). Position platform in
protector.
Observe drawing. Seal exterior of plat-
form with oil and water repellent material
(e.g. Silicone)
silicone seam
Hinweis:
If the pan is accidently damaged when
drilling, perform a pressure test for 24
hours to ensure leak tightness.
Make sure to connect the device with
the platform and the separator to the
supporting structure. Be aware that per-
foration can lead to leakage problems.
We recommend a construction surroun-
ding the pan. If you have to drill make
sure to seal the hole properly. We can
provide information on different fas
-
tening methods.
Fastening
Pressure sensor test port
The cold water circuit needs to have a ½
"
internal threaded connection for the pres-
sure sensor. Make sure the test port can
be isolated from the circuit so you can
replace the pressure sensor without ha-
ving to drain the system.
incl. 5 m cable
