DESCRIPTION
Our dear customer,
Your preferred KUSİNA is nature and technology friendly. We thank you for your choice.
KUSİNA has been produced with the understanding of "Total Quality" in modern production facilities.
Important Safety Information
Carefully read this guide and keep it for future review.
WARNING
: Installation of the devices must be done by an authorized service person.
WARNING:
Equipment must be grounded.
Indicates that there is a risk of personal injury or property damage.
Explosion / fire hazard.
TYPES
G7V100G -
700 Series Half Module Vapour Grill
G7V200G -
700 Seri Full Module Vapour Grill
MOUNTING INSTRUCTIONS
Placement
Installation and adjustment of the device should be carried out by experienced technical staff.
Place the device at least 10 cm away the side walls.
Place the device beneath a filtered exhaust hood in order to eliminate smell and fume that may be emitted
during cooking.
Device should be placed on a flat surface by suitably balancing on the four adjustable legs. (Figure A)
Remove the protective nylon on the device. Clean the adhesive particles left on the device with a suitable
cleaner.
Never leave flammable material near the device.
GAS CONNECTION
Device should be connected in accordance with the national and local gas standards of the relevant
country.
The device should not be directly connected to the tube.
Gas inlets “GAS” of the device are indicated with a label on device body.
Connection to the gas installation should be made with flex pipe and ball valve. Fix the said ball
valve to a place that is away from heat and easily accessible in case of a danger.
Flex connection pipe should be preioudically replaced every 5 years.
After gas inlet connection is completed, check for possible gas leakages.