Guntermann & Drunck GmbH
Operating Instructions UserCenter 2 (4)
Page 12
6.12 Automatic
mouse-reset
With this setting you define whether
UserCenter 2(4)
sends a mouse-reset to
the computer during the switch-on or not (does not work with Unix computers).
For enabling the automatic mouse-reset proceed as follows:
•
Call up the setup mode with
CTRL
+
BACKSPACE
The setup mode will be indicated by the the flashing of the three
keyboard LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock).
•
For enabling press
T
•
To
disable
the automatic mouse-reset againg press
Z
After enabling/disabling the automatic mouse-reset the setup mode will be
closed automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing
ESC
.
6.13
Support for the serial Logitech mouse
With this setting you define whether to connect a Logitech or an Intelli mouse to
the serial interface (V.24).
For supporting the serial mouse proceed as follows:
•
Call up the setup mode with
CTRL
+
BACKSPACE
The setup mode will be indicated by the flashing of the three keyboard
LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock).
•
For the support press
O
•
To
disable
the support again press
P
After the mouse support is enabled/disabled the setup will be closed
automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing
ESC
.
