Guntermann & Drunck RackConsole-LED 17HR, Installation And Operation Manual, Page: 25 / 36

On-screen display
RackConsole-LED 17HR · 6
English
OSD settings
The »Input Select« menu
The Input Select menu lets you select the sources for the main picture channel and the
PiP channel. In addition you can use the menu to configure the PiP mode.
Main picture channel

DisplayPort

DVI

VGA
Select the input source for the main picture channel.
The default setting is
DisplayPort
.
Scan inputs

Off

On
When activating this function, the RackConsole monitors all signal
inputs.
The main picture channel is switched to the first active input.
The function is active by default.
Pip Mode
 Off

Small

Large

Side by Side
The PiP mode (Picture-in-Picture) shows the second video signal in
a seaparate window ( small or large ).
When selecting the option Side by Side , the main picture channel
and the PiP channel are displayed side by side in the same size.
The PiP mode is disabled by default.
PiP Channel

DisplayPort

DVI

VGA
Select the video source for the PiP channel.
PiP Position

Bottom/Right

Top/Right

Bottom/Left

Top/Left
Select at which screen edge the PiP channel is shown.
By default, the PiP channel is shown at the botton right corner.
Swap Main & PiP
[Function] This function switches the input signals of the main picture chan-
nel and the PiP channel.