Installation
3
· RackConsole-LED 17HR
Installation
How to install the TFT drawer:
1. Position the cage nuts.
2. Bolt the preassembled telescopic rails together and adjust them in centre to the
height unit (figure 1).
3. Loosen the screws at the back angle (figure 2).
4. Install the rails into the rack.
5. Extend the middle part of the telescopic rails and slide the drawer on the rails
(figure 3).
6. Insert the cable chain to the fastener at the front until it is locked in place (figure 4).
7. Screw the cable chain to the back of the rail (figure 5).
8. Connect the cables.
IMPORTANT:
The TFT drawer may only be installed into proper racks located in a
clean and dry environment.
Before using the device, check if the plugs and cables are connected accordingly.
3
2
1
5
6
4
Summary of Contents for RackConsole-LED 17HR
