Guntermann & Drunck DVI-Vision-CAT series, Installation And Operating Manual

Page: 107 / 148

Configuration
G&D DVI-Vision-CAT · 30
English
Opening the on-screen display via double keypress
As an alternative to opening the on-screen display (OSD) with the hotkey Hot-
key+Num or Double Num you can also open the OSD by pressing a configured
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under OSD via 2x keypress select one of the following options:
Off  OSD cannot be opened via double keypress ( default )
Ctrl  OSD is opened by pressing the Ctrl key twice
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
Print  OSD is opened by pressing the Print key twice
5. Press F2 to save your settings.
Config
Pan
el
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. In the OSD via double keypress field, you can select between the following
options:
Off  OSD cannot be opened via double keypress ( default )
Ctrl  OSD is opened by pressing the Ctrl key twice
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
PrtSc  OSD is opened by pressing the Print key twice
5. Click on Save .