Establishing a KVM-over-IP™ connection for the first time
G&D DP-Vision-IP ·
16
English
Configuring a KVM-over-IP connection
The
IP address
of the user module (host) as well as the
control port
of the computer
module must be specified to establish a
KVM-over-IP
connection through the com-
puter module.
The configuration of both the
communication ports
and the
data ports
are automatically
exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
Alt
+
Num
to open the OSD of the user module.
2. Select the entry
KVM Connection
and press
Enter
.
3. Enter the following data under
Local
:
4. Enter the following data under
Remote
:
5. Press
F2
to save your settings.
Connecting modules to a productive network
Disconnect the direct connection between the
Network
interface of the computer
module and the
Network
interface of the user module.
Connect the
Network
interfaces of both modules to a Gigabit Ethernet.
NOTE:
The configuration of both the
communication ports
and the
data ports
are
automatically exchanged between the two modules.
Control Port:
Enter the number of the port you want to use.
Communication Port:
Enter the number of the port you want to use.
Data Port:
Enter the number of the port you want to use.
Host:
Enter the
IP address
of the computer module.
Control Port:
Enter the number of the
Control Port
configured in the
computer module.
