Gunter & Hauer EOK 20 BL, User Manual

Page: 45 / 63

Assembly and connection
1. This appliance is intended for home use.
2. This oven is for built-in use only. It is not intended for
use built into a countertop or cabinet.
3. Follow the special installation
instructions.
4. The device can be mounted in a 60 cm wide
wall cabinet.
5. The appliance is fitted with a plug which must be
connected to a properly installed and earthed
socket.
6. The supply voltage must correspond to the voltage
specified on the rating plate.
7. The socket must be installed and the connecting cable replaced
only by a qualified electrician. If it is not possible to reach the
plug after installation, a device for disconnecting all contacts
with a gap between the contacts of at least 3 mm must be
installed at the installation site.
8. Adapters, connecting strips and extension cords must
not be used. Overloading can cause a fire.
Available surfaces
may become hot during use.
13