Gullberg & Jansson V15, Installation And Instruction Manual

Page: 80 / 93

82 83
Use and operation
Check the outgoing water temperature
To check the outgoing water temperature, press the up arrow
for 2 seconds and then release. This displays the outgoing
water temperature for 10 seconds.
The outgoing water temperature
will be displayed once the up arrow
has been pressed for 2 seconds.
Change operating mode
To change the operating mode, press the up and down arrow
keys simultaneously for one second and then release. The
current operating mode is shown, where h is heating mode,
C is cooling mode, and A is auto mode.
In auto mode, the pool heat pump automatically heats or
cools the pool depending on the need, which results in
higher energy consumption.
Once the up and down arrow keys
have been pressed for one second,
the current operating mode is
shown.
Pressing the arrow keys repeatedly
changes the operating mode. The
set value is saved automatically
after 5 seconds.
Pressing the arrow keys repeatedly
changes the operating mode. The
set value is saved automatically
after 5 seconds.