82
Use and operation
3
Description of LED controls
A description of the LED display is given below.
Press and hold the
On/Off button for
1 second to start
and to stop the unit.
Press
to set
the preferred pool
temperature.
The display reads OFF when the
pool heat pump is in standby mode.
83
Start/stop of pool heat pump
Press the On/Off button for one second and release to start
the pool heat pump.
Press the On/Off button for one second and release to stop
the pool heat pump.
The display shows the incoming
water temperature when the pool
heat pump is running.
Pressing one of the arrow keys
displays the current preferred
temperature in flashing mode.
Set the preferred temperature
Press arrow keys repeatedly to set the preferred temperature.
The initial press displays the current preferred temperature
in flashing mode, and for each press the value changes by
0.1 degrees. To save the new settings, wait five seconds
whereupon the screen will revert to the current incoming
temperature or read OFF.
Pressing the arrow keys repeatedly
changes the preferred temperature.
Summary of Contents for V15
