Section B. Installation Instructions
1. Discharge pump installation - The La Lili
discharge pump may be connected to an existing
sink drain or floor drain. It can also pump up to 20
ft high, but this will increase the length of the drain
time. The drain connection is at the rear of the
unit by a 1/2” fitting.
2. Gravity drain installation - The La Lili uses a
standard gravity drain. A floor drain is the
recommended installation. Connection is via a
1/2” pipe. A P-Trap is supplied.
3. Water Supply Connections – The La Lili hot
and cold connections are located at the rear of the
unit. 1/2” Fittings.
4. Electrical installation - Have a qualified
licensed electrician to install the wiring according
to local codes. The CleanJets are 1/5 hp, 120V, 15
AMP 60OHZ. A GFI protected circuit must be used
to supply power to the unit. The roller back
massage chair uses a 115V supply.
5. Secure the base - The La Lili base should be
anchored securely to the floor. The base may be
anchored through the opening in the back of the
base wherever access is convenient for the installer.
WARNING:
FAILURE TO ANCHOR THE BASE MAY RESULT
IN PERSONAL INJURY OR DAMAGE TO THE
UNIT. DAMAGE AS A RESULT WILL VOID THE
WARRANTY.
3
Summary of Contents for La Lili
Page 1: ...Owners Manual ...
