14
6 .03
Lock, Travelling trolley for GH2 F
The locking mechanism/clutch on the travelling trolley is automatic and
changes between a locked and an unlocked state. It changes states each
time it is activated.
Avoid unnecessary contact with the lock.
Contact the Guldmann Service Team if it appears that the lock may be
damaged.
6 .04
Lifting and lowering
1. Check that the switch at the bottom of the hand control is placed in position
2. Lifting/lowering of a person is begun by activating the toggle switch, direction
UP
or direction DOWN
Pressing a button on the hand control automatically switches on the GH2 F
hoist. The GH2 F hoist will automatically switch off after approximately ten
minutes when not in use.
Note
There must be a load on GH2 F corresponding to the weight of a Guldmann
lifting hanger before the lowering function will work.
The lifting/lowering function will be switched off if the 24V DC plug of the
charger is connected to the hand control (point 9.00).
The lifting/lowering function will be switched off if the emergency stop/emer-
gency lowering system is activated (point 4.00/8.00).
7 .00
Transport/running in the rail system
The carer must push GH2 F manually in the rail system.
Note
GH2 F must not be exposed to cold or heat shock, so a cold lifting module
should never be taken into a warm bathroom or similar.
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
