18
Emergency stop
If the GH1 F does not stop/react to the hand control when the GH1 F is in
use, pull the red strap and the lifting/lowering functions (except emergency
lowering) are deactivated.
When the emergency stop is activated, the hoist will not function. The green
lamp is switched off.
Reset emergency stop
Reset the emergency stop by pressing the
yellow button on the bottom of the hoist.
The yellow button that appears when the
emergency stop is pulled, must be pressed
manually before the GH1 F is ready for use.
Emergency lowering function, electric
If the GH1 F fails, the electrical emergency lowering function is used to lower
the user safely. The emergency lowering function is operated by a constant
pull on the red strap that is used for the emergency stop.
When releasing the red strap, the emergency lowering function will be
replaced by the emergency stop.
3.02
Safety functions, installation/deinstallation
Installation/deinstallation
The installation/deinstallation sequence can be interrupted with the hand
control at any time:
1. Press (again) UP
to interrupt the installation/deinstallation sequence
2. Press (again) DOWN
to interrupt the installation/deinstallation sequence
The installation sequence will be automatically interrupted if GH1 F meets
an obstacle/resistance (≥ 5-10 kg) while being moved to the travelling trolley
in the rail system, for instance when blocked by a foreign body during
installation.
If this happens, GH1 F will stop briely and then move freely in the direction of
the travelling trolley.
Resuming installation/deinstallation
When the obstacle has been removed, the installation or deinstallation
sequence can be resumed, cf. point 2.05.
Activation of the emergency stop results in an interruption of the installation
sequence
Activation of the emergency lowering results in an interruption of the
installation sequence
© Guldmann GB/US-1831/12/2016 • # 5
5
1
2
1
4
_
1
0
