16
2.06 Deinstallation
Where applicable, remove the lifting sling from the lifting hanger.
Place the transport trolley beneath the travelling trolley in the rail system.
Check that there are no obstacles of any kind between GH1 F and the
transport trolley.
1. Lift the strap with the hanger towards the end stop on GH1 F
2. Choose the function “deinstallation” with the help of the switch at the top of
the hand control
(
)
3. Deinstallation will start by activating the hand control, by shortly pessing the
button down
4. Deinstallation has been completed when GH1 F is on the transport trolley and
the movement of the cord has stopped
5. Release the travelling trolley’s
anchor with cord from the locking
mechanism on the top of GH1 F.
6. Move the switch at the top of the hand control to position
We recommend steering/guiding GH1 F with the hanger into position on the
transport trolley during deinstallation.
Please note
All deinstallation must be begun by briely moving GH1 F (1-2 seconds) in an
upward direction.
It is not possible to begin the installation and/or deinstallation sequence for
GH1 F when the load on the lifting strap exceeds the standard weight of the
lifting hanger, e.g. if a person is sitting in the lifting sling.
For the same reason a bath chair, a bath stretcher, Horizontal Hoist BS, and
the cross lifting hanger must be removed before installing/deinstalling GH1 F.
The installation/deinstallation function will be switched off if the emergency
stop/emergency lowering function is activated
(point 3.01)
.
© Guldmann GB/US-1831/12/2016 • # 5
5
1
2
1
4
_
1
0
