16
DH200 Manual
Rev 16.0
Playlist Selector Menu
This menu allows you to select which playlist you will play.
1. Press options button on the Dh200
2. Use nav control and scroll to the “playlist selector” menu, click the nav control.
(playlist numbers are 0 through 14 for a total of 15)
3. Note playlist number should be “0” to play the playlist we just built in our example, if not,
click nav control and change to “0”
4. Start with position should be set to “0” to play the test playlist we just built (this is the first
memory location of the playlist)
5. Use nav control and scroll to “enable playlist”, click nav control, rotate nav control
And set this menu to “on”, click nav button.
6. You have just turned on the playlist mode. The menu at the bottom of your display
Should now show “
playlist mode 0 0
”
The words “
playlist mode
” indicate that playlist function is turned on.
The first
0
shown indicates you are in playlist number “0”.
The second
0
shown indicates that you are starting on the first possible memory
location which is the number 0 (the first hymn you programmed)
pressing “play” on the Dh200 ,or “play” on the remote start playing the first hymn you
programmed. pressing stop, and then play should advance to the second hymn.
Playlist Builder
