Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 3
".When the software start to search the Data Radio, the data radio red LED will flash one time. If the red
LED not flash one time or can't detect the Data Radio, please check the connection wires is right or not
and USB -TTL data cable has poor contact or not. After search success, the status bar will have a
corresponding hint:
After detected the Data Radio, read the current various parameter values, you can choose "Read(R)
" read all parameters, also you can click each item of the "read" readout parameters of this item:
After read the current parameters, now you can configure various parameters. In the channel
drop-down menu to select the channel which you need to configure, click on the "Write(2)", underside
column will indicate the parameter setting success.
The Data Radios in the same Group must have the
same channel and air baud rate. If you use Feiyu flight control module, please do not modify the baud
rate (Feiyu flight control module communication baud rate is 19200), if you use other flight control
module then you can change it to the corresponding baud rate.
