Customer Helpline
0333 3201989
8
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
The tool is intended for planing of firmly supported wooden materials, such as beams and
boards. It is also suitable for beveling edges and rebating.
1. SAFETY ON/OFF SWITCH (SEE FIG A)
The switch is locked off to prevent accidental starting. Depress the lock off button then
the on/off switch and release the lock off button. To switch off, just release the on/off
switch.
WARNING: Danger of kickback!
Apply the tool to the work piece only when
switched on.
2. CUTTING DEPTH ADJUSTMENT (SEE FIG B)
The planing depth can be adjusted from 0 to 3mm. Rotate the cutting depth adjustment
knob (13) to set the required cutting depth with the scale (12). Clockwise rotation
increases the planing depth; anticlockwise rotation reduces the planing depth.
It is recommended that test cuts be made in scrap wood after each adjustment to make
sure that desired amount of wood is being removed by your planer.
NOTE:
To protect blades during storage, transporting, etc., set blade depth adjustment
knob to 0.
Operating Instructions
A
B
13
