Customer Helpline
0333 3201989
6
Original Instruction
Safety Information
Important
- Please read these instructions fully before starting assembly
1. Do not use damaged or misshapen grinding wheels or brushes;
2. Use only grinding wheels recommended by the manufacturer which have a marked
speed equal to or greater than the speed marked on the nameplate of the tool;
3. Adjust the spark arrestor frequently so as to compensate for wear of the wheel, keep
the distance between the spark arrestor and the wheel as small as possible and in any
case not greater than 2 mm;
4. The grinder must be secured to a suitable work surface before use
5. For bench grinders and combined bench grinders equipped with straight-sided
flanges, the recommended values of the thickness T and the diameter of the hole see
the technical data;
6. For combined bench grinders, to always keep the brush assembled on the spindle in
order to limit the risk of contact with the rotating spindle.
7. Always wear eye protection and check that the eye shields on the grinder are properly
adjusted.
8. The adjustment of the spark arrestor shall be made frequently ,so as to compensate
the wear of the wheel, keeping the distance between the guard and the wheel as small
as possible, but in any case not greater than 2 mm.
9. The adjustment of the work rest shall be done gradually so as to compensate the wear
of the wheel, keeping the distance between the work rest and the wheel as small as
possible, but in any case not greater than 2 mm.
Bench Grinder Safety Warnings
23 - If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
24 - For tools intended to be connected to a water supply:
- Replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organisation,
- Keep water clear off the electrical parts of the tool and away from persons in the
working area.
