9
Customer Helpline 0345 640 0800
Operating Instructions
Lock and unlock air chuck
Before inflating, make air chuck clamp in unlocked position. Then put on the tire valve and lock the
air chuck.
Start inflating
Press the On/Off switch to start inflating. (If the lock button
is in upper position, slide it down.)
When the pressure reaches the pre-set pressure value, the
tool will stop inflating
Note:
To reset the tire pressure measurement unit, press the
"On/Unit" button to reselect after setting pre-set pressure value.
Note:
The digital pressure gauge records the last pre-set
measurement unit and value.
Note:
After the inflator has reached the pre-set pressure valve,
the digital gauge will go out after 30 seconds, and the tool will
turn off automatically.
Lock button
: The On/Off switch can be locked in the On position. To do so, slide the lock on
upwards, while pressing the On/Off switch, then release the On/Off switch while keeping the lock
on button in it’s upper (lock) position. The device can be inflating by continuous mode.
This is convenient when inflator has to inflate for an extended period of time.
To stop continuous mode, push the On/Off switch once. The lock button will turn back to its
unlock (lower) position.
Air chuck clamp in unlocked position
Air chuck clamp in locked position
13
14
BAR
2.40
3
Digital Display Gauge
Press the "On/unit" button on the digital display gauge
at the rear of the machine to read the current tire pressure
Press the "On/unit" button again to select tire pressure
measurement unit. (PSI, KPA, BAR & KG/CM.)
Press the "+" or "-" button to adjust the pre-set tire pressure
to the required tire pressure.
The pressure gauge on the inflator is for reference only and
may not reflect exact values.( range /accuracy is 0.2-8bar
(3.0-116.PSI) +/- 0.05bar (1.0PSI). To reduce the risk of
overinflation, use a second pressure gauge during inflation
(from time to time).
3
13
14
10
13
14
13
10
10
10
