Customer Helpline
0333 3201989
14
Operating Instructions
9. OPERATION INSTRUCTION OF LASER GUIDE (SEE FIG L1, L2)
The laser guide (5) equipped with this machine is for the purpose of precision cutting.
Make sure the batteries are fitted in the laser guide before carrying out precision
cutting. To fit the batteries, remove the battery storage cover, insert 2xAAA
batteries, then replace cover.
NOTE:
Ensure correct battery polarity. To use the laser guide, simply slide the laser
on/off switch at the “I” position, the laser guide then projects a visible red line on the
workpiece surface, make your cut along the red line.
Switch off the laser after cutting.
NOTE:
The sawdust may “block” the laser beam, clean the laser generator periodically.
WARNING:
Never stare directly into the laser beam and never point the beam at
anybody.
DANGER:
Laser radiation. Avoid direct eye contact with light source.
23
16
b
c
2
15mm
a
Before
After
c
d
e
5
A
B1
B2
B3
C
D
E1
E2
F
G1
G2
H1
H2
I1
I2
J
K1
K2
L1
L2
M1
M2
