11
Step 4
Step 5
Step 6
4. Attached the assembled burner with hose and regulator onto the body (#4) from the
bottom of fryer.
FIG. 5
5. Place the oil vats (#3) and baskets (#1& #2) from the top of the body (#4).
6. Attach the regulator to the cylinder valve by turning the fitting clockwise. Hand tighten
with
the regulator positioned upright. Refer to the assembly diagram for the appliance
above.
**Check that your hose assembly valve is set to not allow gas flow. If you have an
adjustable regulator,
turn the regulator control counterclockwise until it stops. This is the
OFF position. If you have a non-adjustable regulator with manual valve(s), turn the manual
valve(s) clockwise until it stops. This is the OFF position.
FIG. 6
FIG. 4
