8
Assembly Instructions
1. Connect the legs to the base using the
provided allen wrench and screws.
2. Using an allen wrench and the screws, attach
the legs to the lower housing (Figure 1).
3. Install the chute to the top housing using an
allen wrench and the screws.
4. Insert the blade rack assembly into the lower
housing, guiding the drive shaft into the
bearing journals. Make sure the teeth of the
blade racks are properly meshed together.
5. Position the top housing onto the lower
housing and line up the screw holes.
6. Secure the top housing to the lower housing
using the housing thumbscrews. DO NOT
OVERTIGHTEN!
7. Insert the Combs into the top housing (Figure
2).
8. Caution sharp blades! Wear cut-resistant
gloves (sold separately) when handling blades.
9. Install handle onto the blade rack shaft.
Secure the handle to blade rack shaft with the
handle thumbscrew.
