Reading with the Magnifier
To read with the magnifier, operate as the following:
1.
Turn on the unit by sliding the Power on/off switch
⑦
located on the left side of
the unit up to ON position.
2.
Place the magnifier flat against the text you want to read.
3.
Position the crosshair
that appears just below the magnify button over the
approximate location where you want to start reading. Anything beneath this
crosshair is magnified and shown on the screen.
4.
Slide the unit gradually to the right to read to the end of the line. Slide the unit
down and back to the left to read the next line of text.
5.
To change the level of magnification, press the magnify button
.
6.
To change the colors used on the screen, press the yellow Video Mode button
until you find the mode best suited for your vision needs.
7.
To freeze the current image, press the Stop/Play button
. Press it again to
release the freeze.
7