www.guepardnetworks.com
4 |
P a g e
GC1200ac MANUAL
Operation modes
Operation as diagram as below:
P2. Operation modes diagram
There are three operation mode on this wireless AP:
‐
Gateway mode:
The cable internet can be transmitted to wireless internet through PPPOE, Static IP,
and Dynamic IP. The connection topology is showed as follows: Connect Internet cable to Ceiling
AP’s WAN port, PC or end user connect with Ceiling AP through wired/wireless (2.4GHz/5GHz).
‐
AP Mode:
plug and play, suitable for hotel, school, and shopping mall and so on. The connection is:
the internet cable is connected from router/switch to ceiling AP, then ceiling AP will transmit Wi‐Fi
signal, PC and end user can access into internet by wired/wireless (2.4GHz/5GHz).
‐
Repeater Mode:
The ceiling AP can extend the existing Wi‐Fi range if its signal is weak. The
connection shows as above: Ceiling AP can search the existing Wi‐Fi signal then connect it’s
wirelessly, then PC or end user can access into ceiling AP wireless (2.4GHz/5GHz)/wired.
How to connect GC1200ac Wireless AP
Users can connect the PC/Laptop/Smartphone/Tablet… with wireless AP by Wireless SSID and LAN
cable:The default SSID is
GC1200ac
for 2.4GHz and
GC1200ac 11AC
for 5.8G, SSID’s password is
66666666
(number six eight times)
.
