GUDEL ZP 3-5 V4, Operating Manual

Page: 35 / 354

4.2.2 Position of the type plate
The type plate is attached according to the following illustration:
D001087
A
Fig. 4-2 Position of the type plate
A Type plate
4.3 Technical data
For the following data, refer to the layout(s) in the appendix.
• Dimensions
• Weight
• Strokes of the individual axes
• Gearbox type
• Gearbox ratios
• Motors
Emission sound
pressure level
The emission sound pressure level depends on the machine properties and
the operating conditions. Generally the emissions sound pressure level L
pA
is
≤ 80dB(A), measured at a distance of 1 m from the safety fence and 1.6 m
above ground level. The measurement is performed according to the ISO
11202 standard. The measured value is time-averaged over a machine specific
cycle and offset with correction factors for room and environment noise cor-
rection. The measured value contains measuring uncertainty of +/- 4dB(A)
(accuracy grade 3) and applies for a single machine, measured separately.
Product description OPERATING MANUAL ZP 3-5 V4
72057594174110603_v5.0_
EN-US
35