Refuel with engine stopped. Do
not smoke .
Biologic / microbiologic hazard
Oil and fuel leakage is
detrimental to the environment.
Other Hazards
Hazard
Description
Protective action
Residual hazard
Burst in operation
If the unit is operated on an
inclined base, lubrication is not
guaranteed and the unit may
get damaged
Always operate on a flat base .
Disposal
Disposal instructions are given by pictographs on the unit or packaging. For meaning of individual symbols refer to chapter “Symbols
on Unit”.
Operator Requirement
The operator shall read the instruction manual carefully before using the unit.
Qualification
No special qualification is required for use of the unit except for detailed direction by a professional.
Minimum Age
Only persons above 16 years of age are allowed to work with the unit.
Exempted from the provision is the use of the juvenile trainees if they work in the course of their professional training with an aim to
obtain the skill under trainer supervision.
Training
Use of the unit requires adequate lesson by a professional or the use of the manual only. Special training is not required.
Technical Data
Ordering No..:
#40631
Connections
2 x 230V~50 Hz
Permanent output
3500 W/4100 VA
max. output
4000 W/4700 VA
Engine design
1-Zylinder 4-Takt
Volume
270 cm³
max output
6,6 kW/9 PS at 3800 min
-1
Fuel/ tank volume
Benzin/25l
Noise value indication
L
WA
96 dB
Weight ca
68 kg
AVR
yes
AVR (automatic voltage control)
The voltage automatic control provides for the generator voltage spikes to be within the range of values guaranteed by the power
supplying company and not to expose the electronic instruments to any risk.
Caution:
Check before use of the appliance its usability for operation with the generator.
In electronically controlled devices have been previously obtained inquiries by the manufacturer (stereo, computer, TV,
camcorder, electronic hand tools with stepless regulation or chargers, for example) as a result of the combustion engine generator
generates a sine wave does not optimal.
Never switch on a second consumer, while another is already in operation. This leads inevitably to fluctuations, which can destroy an
electronically controlled device.
Transportation and Storage
Caution:
The unit should be operated in the working position only (flat base) since the fuel or oil could otherwise flow out
and the lubrication is not guaranteed any more.
If the battery is employed, it should be taken out before any prolonged out-of-use period and stored at a safe dry
place (a heated area for example).
Assembly and Initial Operation
Assembly of the wheel undercarriage
The wheel undercarriage has to be mounted as shown in the picture 1-A.
14
