•
Do not touch the protective grid and thermal
shield, otherwise burning injury may occur!
Assembly and commissioning instructions (Fig.
A/B/C)
Do not use the device close to flames, sparks or
flammable substances
(except for substances required
for operation - here propane/butane).
Operate the device on a flat and stable surface.
Step 1 (C/1)
Plug the device to a socket (230V~50Hz).
Step 2 (C/2)
•
Connect the reduction valve
(B/7)
with the gas
hose connection
(B/8)
.
•
Connect the reduction valve
(B/7)
with the fitted
gas hose to the gas cylinder valve
(B/12)
.
•
Connect the gas hose connection
(B/9)
with the
heater.
Step 3 (C/3)
Screw out the gas cylinder valve
(B/12)
.
Check the screw closures by tightness test
spray or use a soap liquor. Retighten, if necessary.
Step 4 (Fig. C/4)
Press ON/OFF switch
(A/6)
.
Step 5 (Fig. C/5)
From suction side check whether the fan
(A/1)
revolves.
Step 6 (Fig. C/6)
•
If the fan
(A/1)
revolves, keep the gas valve
button
(A/11)
pressed and at the same time,
press repeatedly the ignition button
(A/5)
until
the burner ignites.
•
Hold the gas valve button
(A/11)
pressed for 10
to 20 more seconds.
•
Check whether the gas heater works
uninterruptedly.
Turning off (Fig. D)
Step 1 (Fig. D/1)
To turn the heater off, first screw in the gas cylinder valve
(B/12)
.
Step 2 (Fig. D/2)
Turn off the device with the use of ON/OFF switch
(A6)
.
Step 3
Unplug the device from the socket to disconnect power
supply.
Only with controllable devices, the heat output can be
regulated by turning the gas regulator. (Fig. A/13)
Replacement of gas cylinder
•
Always replace the gas cylinder outside and out
of reach of flames or flammable sources without
presence of other persons!
•
Close the gas cylinder valve.
(B/12)
•
Screw out the reduction valve
(7)
.
•
Ensure you have the reduction valve seal
available.
•
Connect the device to a new gas cylinder and
proceed according to instructions in "Assembly
and commissioning instructions".
Identification
Product safety:
The product complies with
relevant EU standards
Prohibitions:
No flame!
No operation in closed
spaces!
No smoking!
No pulling the plug!
Warning:
Warning/caution
Caution! Hot surface!
Caution! Dangerous electric
voltage!
Use outside only, however,
protect against rain.
Caution! Dangerous electric
voltage!
Commands:
General prohibition sign
Read operation manual
before use
Secure the gas cylinder
against falling
Unplug the device from
socked before opening or
maintenance
Environment protection:
Dispose waste not to harm
your environment.
Packaging material from
cardboard can be recycled
in a collection point.
Defective and/or disposed
electric or electronic devices
must be delivered to relevant
collection points.
