Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
Making technical changes to improve the appliance as
part of the continuous product development reserved.
Illustrations may therefore be different.
This document represents the original Operating
Instructions.
Supply includes
Take the appliance out of the transport container and
check whether there are the following parts:
•
Lawn trimmer including operating handles
•
Protection cover
•
Rotational knife
•
Star knife
•
Spool of string
•
Shoulder strap system
•
Fixation material
(4x bolt + washer; 4x bolt + expander ring +
nut)
•
Original Operating Instructions
•
Warranty certificate
If any parts are missing or are damaged, please contact
your dealer.
Use as designated
Lawn trimmer for treating and cutting natural grass plots
and low bushes.
The appliance cannot be used for other works than those
for which it has been designed and which are specified in
the Operating Instructions.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to
know that the appliance has not been designed for
industrial purposes.
Appliance description (pic. A-D)
1.
Operating handle
2.
Engine unit
3.
Handle
4.
Shoulder strap system
5.
Spool of string
6.
Star knife
7.
Rotational knife
8.
Protection cover
9.
Post
10.
Post connection piece
11.
Socket plug
12.
Air filter
13.
Choke
14.
Exhaust
15.
Starter cable
16.
Tank
17.
Operating switch
18.
Half throttle lock
19.
Release
20.
Hand throttle
21.
String cut-off knife
Technical specifications
GFS 1250 B # 95151
Engine:
1.25 kW/1.7 PS
Fuel:
Mixture for 2-stroke
1:40
Capacity:
42.7 ccm
Tank capacity:
1 l
Max. speed:
7,500 per min
-1
Mounting dimensions:
750 mm
Weight:
6.1 kg
GFS 1501 B # 95152
Engine:
1.5 kW/2.0 PS
Fuel:
Mixture for 2-stroke
1:40
Capacity:
51.7 ccm
Tank capacity:
1 l
Max. speed:
7,500 per min
-1
Mounting dimensions:
750 mm
Weight:
6.8 kg
Operator requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Before putting the appliance into operation
Assembly
Connect both parts of the post with an aluminium die cast
cap. In doing so, make sure the drive shaft slides in inside.
Insert both parts of the handle (pic. E) in the post and fix
them using bolts and washers (pic. F).
Insert the protection cover in the bottom post (pic. G) and
screw it using bolts, expander ring, washer and a nut.
Depending on the type of work, fit the rotational/star knife
or the spool of string (pic. H-N).
1. Use the fork wrench and socket-screw key or any
other suitable tool to loosen the nut on the cutting
head. Then, remove the protection cover and
distance disc.
2. Now fit the necessary knife or string head to the bolt.
3. When the rotational or star knife is used, the distance
disc, protection cover and nut must be refitted.
It is not necessary for operation with the spool of
string.
Protective gloves to be worn when fitting the knife.
Please make sure the assembled parts are firmly
tightened.
10 - GB