6
Expert PDU energy 8310
Hardware
Freq
50.02Hz
Powerfact
-0.3
The power frequency (50Hz in the German electricity grid) and the power factor.
Gude PDU 8310
192.168.1.123
This page provides information on the product name and the assigned IP address.
Firmware 1.0.0
MAC:001932003f09
The firmware version number and used the MAC ethernet address.
Configuration
4
DHCP
4.1
After turning on, the unit looks for a DHCP server on the Ethernet and requests an available IP address. Check in the settings
of the DHCP server which IP address was assigned, and if necessary set, that the same IP address will be used each time.
To disable DHCP, you can use the software GBL_Conf.exe or adjust the configuration via the web interface.
Network settings with GBL_Conf
4.2
For changing the network properties manually, the program
GBL_Conf.exe
is required. This tool is available for free on our
website
Furthermore
GBL_Conf.exe
enables you to install firmware updates and to reset to factory settings.
Activate bootloader mode and run
GBL_Conf.exe
. The program will look automatically for connected devices and will display
their network configuration.
If the displayed IP address accords with the factory settings (192.168.0.2), there is either no DHCP server available in the
network or no free IP address could be allocated.
Enter a free IP address and the according netmask in the entry mask, then save these changes by clicking on
Program Devi-
ce -> SaveConfig
.
Restart the firmware, so that the changes will take effect. Now click on
Search
in order to have the new network configuration
displayed.
