EN
Quick Start
1. Please read
Important Notes
on page 21 of this manual to avoid
damages of Expert GPS CLOCK due to improper use.
2.
Serial adapter
: connect the PS/2 plug of the module to the PS/2
port of the adapter, plug the serial connector to the serial port of
your PC and plug the USB plug to a USB port.
USB adapter
: Install the USB driver (
see
chapter 2.2
). Plug the
PS/2 connector of the module to the PS/2 socket of the adapter
and plug the USB plug to a USB port.
3. Place the receiver close to a window for an unobstructed view to
the sky (e.g. attached from inside to the windowpane, the labled
front side facing the window or placed on the windowsill with the
backside downwards).
4. Install the software with the setup routine (
see chapter 2.3
) and
start the driver
ExpGPS.exe
.
5. Under
Options | Serial connection
choose the COM port or the
virtual COM port for the USB adapter respectively.
6. On tab page
GPS Data
the current system time and the received
GPS time are displayed. In
Options | Synchronise PC time every
x minutes/hours
you can configure how often the PC time will be
synchronised to GPS time.
7. More information concerning installation and program handling
can be found in this manual or in the online help.
Expert GPS CLOCK
31
