GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Illustrative pictures!
Translation of original operating instructions.
GB
Do you have any technical questions
?
Any claim? Do you need any spare parts or operating instructions
?
We will quickly help you and without needless bureaucracy at our home page
www.guede.com
in the Service part. Please help us be able to
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
can be found on the type label. Please enter the data below for future reference.
Serial No.: Order No.: Year of production:
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
Unit Marking
Meaning of Symbols
Symbols shown below are used in this manual and on the
unit:
Product Safety:
Product conforming to respective
EU standards
Bans:
General Prohibition
(in combination with another
pictograph)
Do not stand below the jib
Warnings:
Warning/caution
Hung load 1000 kg max.
Risk of stumble
Risk of hand nip
Commands/Instructions:
Read instruction manual before
use
Use steel–toe protection boots
Use protection gloves
Environment Protection:
Dispose of the waste in an
environment-aware manner.
Cardboard packaging material
may be delivered to a salvage
point for recycling.
Defective electric and electronic
devices or those to be disposed
of should be delivered to a
salvage point for recycling.
Packaging:
Protect from rain
Packaging placing direction – up
Fragile!
Scope of Delivery (Fig. 1)
1. Base
2.
Large castors 4x
3.
Small castors 2x
4.
Chain and hook
5. Screw
4x
6. Cotter
4x
7.
Hexagon screw M16x110 1x
8.
Nut M16 3x
9.
Hexagon screw M16x85 2x
10. Nut M14 7x
11. Hexagon screw M14x85 1x
12. Hexagon screw M14x75 1x
13. Hexagon screw M14x95 4x
14. Hexagon screw M14x100 1x
15. Flushed head screw M8x20 8x
16. Nut M8 24x
17. Hexagon screw M8x15 16x
18. Washer for M8 16x
19. Jib
extension
20. Base extension 2x
21. Rigid
column
22. Brace 2x
23. Lifting
lever
24. Cylinder
25. Jib
Unit
Workshop crane GWK 1000
A fixed workshop crane for professional use. Made to lift
loads up to 1,000 kg. Safety valve. Folding design to save
space at storage and transportation. Base made of a square
hollow section sized 70 x 70 x 2,5 mm.
GB
EU Declaration of Conformity
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany
hereby declare the conception and construction of the below-
mentioned appliances correspond - at the type of construction being
launched - to appropriate basic safety and hygienic requirements of
EC Directives. In case of any change to the appliance not discussed
with us the Declaration expires. Marking of appliances:
Workshop
crane GWK 1000
Order No.
24360
8
