24
EN
SYMBOLS
Read the operating instructions to reduce
the risk of injury.
Ground before use
Warning / Caution!
Warning against dangerous voltage
Use a welding mask!
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
Keep dry at all times. Never expose tool
to rain.
1
1
~
~
Single-phase transformer
MIG (welding, metal-inert-gas)
MAG (welding, metal-active-gas)
Single-phase alternating current with
rated frequency of 50 Hz
V
Voltage
AC Current
No gas
Wire feeder
40A
96V
25.8A
15A
40A/26V
10A/84V
30A
90.3V
20A
88V
GPS 40A
Class H
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
Made in P
.R. China
370V
375 -001客户 IPC40H 下底壳丝网 20170904 V0版
Fan
Suitable for welding with an increased
electric risk.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
TÜV / GS conformity mark
MAINTENANCE
Machine to be always unplugged before
any adjustment and servicing work on it.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING
The appliance must not be used if da-
maged or safety equipment is defective. Replace any
worn-out and damaged parts.
If the device is defective, the repair has to be made
exclusively by an authorized customer service..
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
ENGLISH
