18
Technical Data
Welder
SG 130 A
Art. No
20071
Degree of protection
IP 21S
Insulation class
H
Mains voltage U
1
230 V
Mains frequency
50 Hz
Maximum rated input current I
1max
17 A
Maximum effective input current I
1eff
5,8 A
Max. input
230 V ( 3,9 kVA )
Protection, time delay
16 A
No-load voltage U
0
32 V
Idle state power
22 W
Efficiency of the Welding Power Source
70%
Load voltage U
2
120 A / 20 V
25 A / 15,25 V
max.. Welding current
230 V ( 120 A )
Regulated section Welding current I
2
25 A - 120 A
Number of switching steps
None
Duty cycle at max. electricity ( 230V ) X *
120 A ~ 10 ~ %
Material thickness
1,5 - 8 mm
Wire thickness (Flux cored electrode)
0,9 mm
Dimensions L x W x H
350 x 190 x 320 mm
Max. wire consumption at max. power and max. wire feed
0,6 mm Wire
16 g/min
0,9 mm Wire
26 g/min
Flux cored electrode welding
Yes
Net/gross weight
13,1 kg / 17 kg
This device consists of the following recyclable materials:
Sheet steel, Copper, Aluminum, ABS
* The ratio of given duration time/the full-cycle time.
Note 1: This ratio shall be within 0~1, and can be indicated by percentage.
Note 2: In this standard, the full-cycle time is 10 min. For example, if the duty cycle is 60 %, the load-applying
time shall be 6 min and the following no-load time shall be 4 min.
Switch-on time determined at 40°C using simulation
You can find all the technical documents required in the Ecodesign Regulation
2019/1784 at:
https://www.guede.com/cgi-bin/twinklecom.cgi?contentidx=0¶m=PAGE&tid=GSC-Ersatzteile-
Online-Shop&setartfocus=20071
ENGLISH
,
EN
