Attention: when need saving telephone expense or the alarm needn’t be network, you can not set it.
—
delay <system delay> 4.delay
Enter menu 4. relay
→
LCD display:
After inputting press # key to confirm.** is delay time for away home when arming, it can set to 00~99sec.
·
·
·
·
arm zone setting 2.zone
Enter menu 2. zone
→
LCD display:
** is 01~12 arm zone, after inputting press # key to confirm, and then according to your need select [instant], [delay], [24 hours],
[bypass] arm zone type.
When select [1.instant]
，
after it receive signal, the controller will dial and alarm immediately, and the corresponding alarm
information is “security alarm
”
;
When select [2.delay]
，
after it receive signal, the controller dial and alarm after some time, and the corresponding alarm
information is “security alarm”;
after select[ 3.24Hr], according to your need select [1.smoke]
，
[2.gas]
，
[3.panic]
，
the corresponding alarm information are"fire
alarm
″，
"gas alarm
″，
"help alarm
″
separately.
When select [ 4.bypass], the arm zone do not work.
·
·
·
·
setting 3.setup
—
siren alarm time setting1. alert
enter menu 1.alert
→
LCD display:
After inputting press # key to confirm,*** is siren’s alarm delay, can set to 000~999sec, factory set to 300sec.
—
guard setting2. home
enter menu 2.home
→
LCD display:
After inputting press # key to confirm,** is the arm zone NO. guarded. When host is at home, after home arm, the system will
ignore the guarded detector (for example: PIR sensor). So host can move freely indoor and not arising alarming.
—
telephone setting
enter menu3.call
→
1.tel
→
LCD display:
1 group is network center number, when no network, you can not set the number;
2,3,4 group is speech alarm telephone number. If you need to delete the number, only set the number to [0]. select the telephone
group No.(1-4),LCD display:
Input delay
**
Input arm zone:
**
1.instant 2.delay
3.24Hr 4.bypass
1.Smoke 2.gas
3. Panic
Set alarm time
***
Set arm zone NO.
**
1.tel 2.tel
3.tel 4.tel
Input tel NO.
*************
1.Sys 2.Zone
3.Setup 4.Study
Press 2
2.Zone
1.Sys 2.Zone
3.Setup 4.Study
Press 3
1.alert 2.home
3.call 4.del home