Guardian Telecom Inc.
Setup & Configuration
VoIP Telephones
2. On the
Autoprovisioning Configuration
page, you may enter values for the parameters indicated in Table 10.
Web Page Item
Description
Autoprovisioning
Enable Autoprovisioning:
When this option is enabled, the device will try to fetch an
autoprovisioning file from a remote server.
Get Autoprovisioning from DHCP:
When this option is enabled, the device will fetch it’s
autoprovisioning file from the server specified from the DHCP
server.
Autoprovisioning Server (IP Address):
If the option to get autoprovisioning from DHCP is not enabled,
the device will try to fetch its autoconfiguration file from this
configured address. The field accepts a standard ipv4 address in
dotted decimal notation.
Autoprovisioning Autoupdate (in
minutes):
This field accepts numbers from 0-999999. If this field is set to 0,
the autoprovisioning autoupdate is disabled. If this field contains
anything other than 0 it will re-download its autoprovisioning file
after the configured number of minutes and force the board to
reboot if the new autoprovisioning file differs from the current file.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.
Table 10 - Autoprovisioning Configuration Parameters
Autoprovisioning Template is located on the CD - APTemplate.xml
Page 31
