Guardian Telecom Inc.
Setup & Configuration
VoIP Telephones
Web Page Item
Description
Stored Network Settings
Shows the settings stored in non-volatile memory.
IP Addressing:
This setting is used to configure the device to use the static IP address
configured below or to fetch its address from a DHCP server on the network.
When the device is plugged into a network without a DHCP server, it will
request an address 12 times over the course of 60 seconds before it will fall
back on the last known good DHCP address, or if it has never had a DHCP
address, to the stored static IP address (by default 10.10.10.10).
IP Address:
The IPV4 static IP address in standard dotted decimal notation.
Subnet Mask:
The IPV4 routing prefix in standard dotted decimal notation.
Default Gateway:
This is the node to go to when an IP address doesn’t match any routes in the
routing table. This requires standard quad-dotted decimal notation.
DNS Server 1:
DNS Server 2:
The DNS server configuration is used to setup the primary and secondary name
servers for the network. These use standard dotted decimal notation.
Current Network Settings
Shows the current network settings.
IP Address:
Shows the current Static IP address.
Subnet Mask:
Shows the current Subnet Mask address.
Default Gateway:
Shows the current Default Gateway address.
DNS Server 1:
Shows the current DNS Server 1 address.
DNS Server 2:
Shows the current DNS Server 2 address.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.
Table 5 - Network Configuration Parameters
Page 15
