8
9
QUICK START GUIDE
OLAS TAG OPERATION
1.
Turn on OLAS transmitters within 1 metre of the Guardian
2.
Turn on power to the Guardian or press the control switch once
3.
Wait for 30 seconds – check the number of sound and light signals represent the number of OLAS
transmitters switched on within 1 metre
4.
Download the OLAS mobile application and check battery status of all OLAS tags
5.
WARNING:
Always check the battery of any OLAS transmitter before leaving the dock.
If a transmitter battery runs out whilst being used in the system it will cause the engine to
immediately stop!
6.
CHECK BEFORE FIRST USE
- Run the engine in idle and place the OLAS transmitter at least 4
inches into open water (a cup or bucket will not be enough!)
7.
The engine will cut out
8.
Press the control switch once to Pause the alarm
9.
After 5 seconds you will be able to operate the boat as normal
10.
Bring the OLAS transmitter back within 1 metre and press the Guardians control switch once to reconnect
11.
The Guardian can be switched off at any point by pressing the control switch for 4 seconds or when
the power is disconnected. This will not stop the engine
Switch ON:
Press the button for 4 seconds until the light flashes Green
Switch OFF:
Press the button for 4 seconds until the light flashes Red
Replacing the battery
DO NOT dispose of batteries in fire. Batteries
should be recycled or disposed of as per your local
guidelines.
Replace the lid ensuring the silicone insert is not
damaged and the screws go through the holes
correctly. DO NOT overtighten the screws.
GUARDIAN FUNCTIONS
There are 3 operating states which can be applied to individual OLAS Transmitters using the OLAS mobile app:
a. Cut-off and Alert (DEFAULT)
When an OLAS transmitter goes out of range, within 2 seconds the Guardian will cut-off the engine, sound
its internal alert and trigger the MOB alert on the OLAS app. After 5 seconds the engine can be restarted by
anyone remaining on the vessel
b. Alert
When an OLAS transmitter goes out of range, within 2 seconds the Guardian will sound its internal alert
and trigger the MOB alert on the OLAS App. The engine will NOT cut-off and a rescue can be performed
immediately. This mode should only be used for passengers
c. Paused
Pause state should be used when the user knows an OLAS transmitter will go out of range and they do not
want the Guardian to react i.e. leaving the boat for an extended period or swimming
Cut-off and Alert
Pause all tracking
Button
Alert only
Paused
Add new transmitters
within 1 metre
LED (Green/Red)
Summary of Contents for EXPOSURE OLAS
Page 1: ...PUG2...
