Guardian Telecom Inc.
Installation and Operation
ACR/ACT-VoIP Series Telephones
6.
Supported Protocols
The ACT-VoIP Telephone with Keypad supports:
●
SIP (Session Initiation Protocol)
●
HTTP Web-based configuration
Provides an intuitive user interface for easy system configuration, and verification of ACT-VoIP Telephone with
Keypad operations.
●
DHCP Client
Dynamically assigns IP addresses in addition to the option to use static addressing.
●
TFTP Client
Facilitates hosting for the Autoprovisioning configuration file.
●
RTP
Facilitates autoprovisioning configuration values on boot.
●
Audio Encodings
PCMU (G.711 mu-law)
PCMA (G.711 A-law)
Packet Time 20 ms
7.
Supported SIP Servers
As a SIP device, this product will operate with most IP PBX servers.
8.
ACR/ACT-VoIP Telephones Wiring
8.1. Connections
Figure 5 shows the pin connections on the J9 (terminal block). This terminal block can accept a wire range from 16
AWG to 26 AWG.
Note:
As an alternative to using PoE power 12 to 24 VDC at 500 mA can be supplied to the terminal block.
WIRE IN
ACCEPT WIRE RANGE
UP TO 16 AWG
ALTERNATE POWER INPUT:
3 = +12V TO +24V @ AT 500mA
4 = POWER GROUND
5 =
6 = RINGER -
1
2
RELAY CONTACT:
0.5A AT 30VDC FOR CONTINUOUS LOADS
1 = NORMALLY OPEN COMMON
2 = NORMALLY OPEN CONTACT
J9
1
2
3
4
5
6
TERMINAL BLOCK CONNECTION (J9)
Figure 5 - Terminal Block Connections
Page 11
