Guardian 55 ES, Operator'S Manual

Page: 23 / 34

23
LUBRICATION AND MAINTENANCE
BREAK-IN ( AFTER FIRST 8 HOURS)
EVERY
8 HOURS (DAILY)
EVERY
25 HOURS
EVERY
50 HOURS
EVERY
100 HOURS
Every
200 HOURS
EVERY
300 HOURS OR ANNUALLY
PROCEDURE COMMENTS
X
Check all hardware for tightness
X
Check drive belt for proper alignment
X
Change engine oil (break-in) See Engine Owner's Manual
X
Check engine oil level See Engine Owner's Manual
X
Check compressor oil level
X
check or clean engine air intake screen See Engine Owner's Manual
X
Wash and clean ULV sprayer See cleaning machine- this manual
X
Check all hardware for tightness
X
Check and clean atomization nozzle
X
Check belt tension
X
Clean air filter foam element See Engine Owner's Manual
X
Clean fuel filter element See Engine Owner's Manual
X
Change compressor oil See Compressor Owner's Manual
X
Check and verify formulation calibration
X
Change engine oil (Kawasaki engine only) See Engine Owner's Manual
X
Clean air cleaner paper element
X
Change engine oil (Honda engine only) See Engine Owner's Manual
X
Clean and regap spark plug See Engine Owner's Manual
X
Clean formulation filter
X
Check and clean compressor intake element
X
Change compressor oil See Compressor Owner's Manual
X
Clean and rinse formulation tank
X
Replace air cleaner paper element
X
*Clean combustion chamber
X
*Clean and lap valve seating surface
X
*Check and adjust valve clearance
* Have an authorized Honda engine dealer perform these services