ENGLISH
ENGLISH
46
47
Operator’s manual | Knapsack Sprayer - Balance
Operator’s manual | Knapsack Sprayer - Balance
A
B
2
th
-
This sprayer has a quick unlock system in the belts (Figure 9.A), providing greater safety when necessary to remove the sprayer from the
back quickly. To activate the system, simply tighten the ends of the quick interlocking system at the same time (Figure 9.B).
3
rd
-
Place the equipment in the back, adjusting the belts through the adjustable clasps, pulling the belt to tighten (according to Figure 10.A)
and lifting the clasps to release (Figure 10.B);
4
th
-
The activation lever has a differential the length adjustment, which best suits the user size differences. To use this adjustment, partially
unscrew the gauntlet nut (Figure 11.A), then move the knob to the desired position and re-thread the gauntlet nut to fix the lever inro position
(Figure 11.B).
5
th
-
Operate the lever rhythmically until the desired working pressure is reached; the equipment has a pressure relief valve that will be
activated when the pressure in the accumulator exceeds the maximum limit, when activated, there is usually a slight noise when the lever is
actuated, indicating that it is unnecessary to continue to activate it;
6
th
-
For spraying, direct the nozzle to the target to be sprayed and activate the discharge valve trigger (Figure 12).
8
th
-
Using S7 discharge valve functions: To activate the spraying, first check that the safety lock (red color) is in the position shown in Figure 13.A,
that is, above the valve pin. Then activate the trigger to release the spray. If the operator wants the continuous activation function, simply
move the fixing lock (color black) forward as shown in Figure 13.B.
9
th
- Using the Super 3 Valve:
To enable continuous spraying function, first hold the trigger pressed (Figure 15A) and then press the trigger
locking latch as shown in Figure 15B.
In order not to accidentally activate the valve, the safety catch MUST BE pushed forward as shown in Figure 14.
ATTENTION
Figure 9.
Fast belt unlocking system.
Figure 10.
Adjustable clasps/Great comfort/Facilitate the
placement of the equipment in the back.
Figure 12.
Activation of the S7 discharge valve.
Figure 11.
Adjusting of the length of the lever.
Press to release
Fast unlocking system
A - Press
B - Release
A
B
Press to release
Gauntlet
nut
Activate trigger
Adjustment of
the length
