Issue 07/2011
Page 56
Bu
ilt
-in g
en
er
at
or
s w
ith s
w
itch c
ab
in
et f
or p
er
m
an
en
tly i
ns
ta
lle
d p
ow
er g
en
er
at
io
n s
ys
te
m
s ≥ 1
2 k
VA i
n fi
re e
ng
in
es
Operation
General safety instructions, operation
5
Operation
This chapter describes the operation and control of the power generation
system. Depending on the power generation system equipment, deviations
can arise. Reference is made to these deviations in the corresponding
sections of this manual.
Before using the power generation system, carefully read the general safety
instructions in section 5.1 and sections 5.2 to 5.5 and follow the instructions
and information therein.
5.1
General safety instructions, operation
Danger
Danger to life through electric shock
y
During operation, the power generation system generates
voltages that are potentially fatal.
►
Never
touch the generator, the switch cabinet or the
devices attached to the power generation system with wet
hands during operation.
Danger
Danger to life through electric shock
y
Working on the generator or switch cabinet, visual inspections
for maintenance purposes or cleaning work on the power
generation system during operation can lead to potentially
fatal injuries through electric shock.
►
Switch off the drive unit before performing any inspection
or maintenance work on the generator or switch cabinet.
Prevent the drive unit from being switched back on by
accident (e.g. remove the ignition key and keep somewhere
safe).
Danger
Risk of injury
y
When protective coverings are not in use, there is a risk of
injury through electric shock, moving parts and hot surfaces.
►
Only operate the generator with the fitted protective
coverings proscribed for the drive in the regulations.
Summary of Contents for DWG (BL) 13/7-2 ZE
Page 87: ...Page 87 Issue 07 2011...
