GTS BG 132, Installation And Operating Manual

Page: 21 / 128

Page 21 Issue 05/2013
Description
Variants for the electrical connection
4.3.3 Mechanical versions
Depending on their nominal output, the generators are constructed in
various model sizes.
Ö
Models (BG 132 and BG 160), page 15
4.4 Variants for the electrical connection
Ö
Generator with attached terminal box (standard version), page 21
Ö
Generator with attached corrugated pipe,
controller electronics installed externally, page 23
Ö
Generator with attached switch box, page 23
4.4.1 Generator with attached terminal box (standard version)
The terminal box attached to the generator contains a terminal board for the
connection lines as well as the generator controller. A noise filter can also be
installed in the terminal box. The noise filter can be housed in an external
switch cabinet if required.
Ö
Terminal box, page 22
5
6
1 Drive shaft
2 Mounting profile
(all around, every 45°)
3 Mounting hole for assembly
4 Mounting profiles
(both sides)
5 Cooling profiles
6 Fan wheel cover
7 Cooling air inlet
8 Terminal box with generator
controller
1
2
4
8
3
7
Fig. 4 Dual-bearing generator, model 132, with terminal box