11
THIS UNIT MUST ONLY BE INSTALLED BY AN EXPERIENCED TECHNICIAN.
Preparation of the Gate
Before installing the GTO/PRO swing gate operator, make sure:
• the gate is properly installed.
•
the gate is plumb, level, and moves freely.
• the gate does not bind or drag on the ground.
INSTALLING THE GATE OPERATOR
Operator Installation Overview
The diagram below is an example of a single swing gate installation with required safety features. The operator must
be installed on the inside of the gate. You must install safety edges or photoelectric sensors (not included) and
safety covers to reduce the possibility of bodily injury.
NOTE: A separate gate or entrance must be installed for pedestrian use.
Use rigid conduit
for inbound AC wire.
Use PVC conduit
for Receiver wire
Safety Edge
Warning Sign
Knuckle Cover
Pivot Cover
Operator
Receiver
AC POWER
Safety Edge
