GTO LOOPDT1 Reference Manual Download Page 8

Converting Metric Units to English Equivalents

When You Know 

Multiply By 

To Find 

Symbol

centimeters 

0.3937 

inches 

in. (or “)

meters 

3.2808 

feet 

ft.  (or ‘) 

kilograms 

2.2046 

pounds 

lb. (or #)

Converting English Units to Metric Equivalents

When You Know 

Multiply By 

To Find 

Symbol

inches 

2.5400 

centimeters 

cm

feet 

0.3048 

meters 

m

pounds 

0.4535 

kilograms 

kg

Converting Temperature

deg. Celsius 

(ºC x 1.8) + 32  deg. Fahrenheit  ºF

deg. Fahrenheit 

(ºF-32) ÷ 1.8 

deg. Celsius 

ºC

Conversion Chart

This product and any accessory you purchase should only be installed on a gate 
operator that meets the current safety standard, UL325, latest edition.  If you have 
a gate operator that is not listed with the current standard please contact the GTO 
sales department for consultation on a gate operator that can meet your specific 
needs.

If you have any questions call Technical Support at... 

(800) 543-1236

or GTO/PRO Sales at... 

(800) 543-4283

GTO 

Limited One Year Warranty: 

GTO, Inc., gate operators and accessories are warranted by the manufacturer against defects in materials and manufacturer workmanship 
for a period of one (1) year from date of purchase, 

provided the recommended installation procedures have been followed.

In the case of product failure due to defective material or manufacturer workmanship within the one (1) year warranty period, the product 
will be repaired or replaced (at the manufacturer’s option) at no charge to the customer, if returned freight prepaid to GTO, Inc., 3121 
Hartsfield Road, Tallahassee, Florida, USA 32303.

 IMPORTANT: Call (850) 575-4144 or Fax (850) 575-8950 for a

 

Return Goods 

Authorization (RGA) number before returning accessory to factory.  

Products received at the factory without an RGA number will not 

be accepted.  Replacement or repaired parts are covered by this warranty for the 

remainder

 of the one (1) year warranty period or six (6) 

months, whichever is greater.  GTO,  Inc. will pay the shipping charges (equal to United Parcel Service GROUND rate) for return to the 
owner of items repaired under warranty. 

The manufacturer will not be responsible for any charges or damages incurred in the removal of the defective parts for repair, or for the 
reinstallation of those parts after repair. This warranty shall be considered void if damage to the product(s) was due to improper installation 
or use, connection to an improper power source, or if damage was caused by lightning, wind, fire, flood, insects or other natural agent.

After the one (1) year warranty period, GTO, Inc.  will make any necessary repairs for a nominal fee.  Call GTO at (800) 543-1236 for 
more information.  This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. 
This warranty is in lieu of all other warranties, expressed or implied. 

NOTE: Verification of the warranty period requires copies of 

receipts or other proof of purchase.  Please retain these records.

Summary of Contents for LOOPDT1









Reviews: