background image

      5

GLENTEK  Inc.  208 Standard Street, El Segundo, California 90245, U.S.A.  (310) 322-3026

SMA7215 MANUAL

Introduction

Glentek's brush type DC servo motors and amplifiers offer the ultimate in low maintenance

and high performance motion control. Glentek offers a full line of matched motors and amplifiers

to meet virtually every motion control application.

This manual provides all the technical information necessary to install, configure, operate,

and maintain our TORQUE-SWITCH

 series, brush type servo amplifier, model SMA7215.

There is also an informative theory-of-operation chapter.

We suggest that you take the time to read this manual from cover-to-cover before

attempting to work with these amplifiers for the first time

. If at any time you have questions,

or have any special requirements, please feel free to call and discuss them with a Glentek

applications engineer. We are happy to provide both off-the-shelf and custom products. With over

three decades in the servo-motor/amplifier business, we have a vast pool of applications

knowledge waiting to assist you.

Thank you for selecting Glentek for your motion control needs.  It is our goal to save you time,

money, and to provide you with a superior product.

Summary of Contents for SMA7215



































Reviews: