MEASURED VALUE MEMORy
19
GMG-200
310-2310-001 EN20
8 Measured Value Memory
Z
All measured values are saved at the end of each mea-
suring run.
►
Up to 90 measuring runs can be saved. Then the mem-
ory has to be cleared!
TIPS AND RECOMMENDATIONS
If there is not enough space left in the memory to save a complete measuring
series, the following message appears when the “Start” button is pressed:
“Out of memory, read or erase!”
8.1 Reading Out Measured Value Memory
Viewing values in the memory
►
Device idling: Press the “Stop” button once.
Device operating: Press the “Stop” button twice.
Z
The view mode “Memory” appears in the display.
Displaying completed measuring runs
►
Press the “Stop” button for each additional measuring run to be displayed.
Z
The measured value memory appears in the display, beginning with the highest number
and going back.
Exiting display mode and returning to starting screen
►
Hold down the “Stop” button for two seconds.
Out of memory
read or erase !
