18
GMG-200
310-2310-001 EN20
MEASURING SERIES
6.8 Canceling a Measuring Run
If during a measuring run the “Stop” button is pressed or a
system error is detected, the measuring run is immediately
canceled.
►
Press the “Start” button to slowly retract the strap.
6.9 New Measuring Run
A new measuring run can be started right after the previous run ends.
1
Position the device.
2
Press the “Bandauszug” button: Draw out the strap.
3
Attach the strap to the foot plate and secure it.
4
Press the “Start” button: Start measuring run.
TIPS AND RECOMMENDATIONS
When the device starts up, force (0 - 100 N, depending on the sliding friction) is
applied to the foot plate via the strap. This is why it is essential to weight down
and secure the foot plate with body weight!
7 Measuring Series
A total of 18 standard measurements - consisting of five measuring runs (scans) each - can be
performed.
TIPS AND RECOMMENDATIONS
The standard measurement is complete when five measuring runs have occurred.
If additional standard measurements are to be performed, press the “Neue
Messung” button!
1
Press the “Neue Messung” button to initiate a new measuring series.
Z
The number of the measuring run is adjusted automatically in the display.
Z
The number of measuring series increases automatically.
2
Prepare for the new measuring run.
Cancel
Key Bandauszug
or
Start: pull in
