11
420-2410-002 EN11
INSTAllATION
ADICOS M-BUSMASTER S
5 Installation
The ADICOS M-BUSMASTER S is a tabletop device that is intended to be used indoors. With
the option top hat rail bracket, it can be mounted on a top hat rail in an electrical cabinet. If
the device is operated as a tabletop unit, the included self-adhesive feet should by stuck to the
bottom of the enclosure.
5.1 Mounting on Top Hat Rail
If the device is equipped with the optional top hat rail bracket,
it can be attached to a top hat rail (e.g. in electrical cabinets).
1
Press the top hat rail bracket against the top of the top
hat rail
2
Tilt the device down to lock the bracket onto the top hat
rail
5.2 Wiring
WARNING!
Incorrect installation of the ADICOS M-BUSMASTER S can cause malfunctions
and failure of the detection system.
−
Only properly trained personnel may wire the equipment!
Qualification Required of Personnel)
Before beginning any wiring work, deenergize the entire detection
system and secure it to prevent it from being switched on again!
−
Use only ADICOS connection cable to connect the detector.
−
Use only suitable fire detection cable for the ADICOS
primaryline and the BMA-LOOP!
KLICK!
Summary of Contents for ADICOS M-BUSMASTER S
Page 19: ......
