GTD GTD-LP200, User Manual

Page: 5 / 19

2
General guidelines

The protection rating of this product IP20.

Never open this fixture while it is in use.

The fixture should be kept clean. DO NOT operate the fixture in extreme heat or dusty environments. Avoid contact
with chemical liquid.

Minimum distance to lighted objects must be 16.4 feet (5m).

Maximum temp of the external surface
167˚F (75˚C).

Maximum ambient temperature 113˚F (45˚C).

Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).

Lamp should be replaced if damaged or distorted in shape due to extreme heat.

Cover, prism or LCD Menu Function Display with visible damages such as cracks or scratches must be replaced to
ensure performance of the fixture.

Disconnect the fixture from power before changing any parts or accessories.

Basic insulation should be maintained between the controllable device and the product power supply.

Make sure that the installation area can hold a minimum point load of 10 times the weight of all installed fixtures,
clamps, cables, auxiliary equipment, etc. Make sure that the cover, clamps and locks are undamaged. Certified safety
cables must always be used when installing the fixture.

The fixture is only intended for installation, operation and maintenance by qualified professional. Instructions stated in
the manual must be complied.

The fixture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if the fans or
ventilation openings are unblocked.

This fixture uses discharge lamp. Avoiding reduce the lamp’s life, wait at least 15 minutes after powering off to allow
the unit to cool down before handling.

To ensure operational safety, broken or damaged cables and light source can only be fixed or replaced by certified
technicians, certified local distributors or the manufacturer.

Do not stick filters or other materials onto the lens. Do not modify the fixture or install other than GTD manufactured
parts.

For questions regarding safety operation, please contact our technical personnel or call the service hotline
+862061808296.