GTD-440P II BSW User Manual
7
Installation
Clamps installation
The fixture can be placed on the stage or mounted on the truss facing any direction. Attach the clamps to the mounting
position on the base of the fixture.
Warning
Use two clamps when mounting the fixture. Turn the screws attached to each clamp a 1/4 turn clockwise to lock. Always
remember to use the safety cable which goes through the mounting hole on the base. Do not attach the safety cable on the
handle.
Device installation
（
Note
：
The lamp is heavy, suggest to lay flat, no suggest to hang, no side hanging
）
1.
Make sure there is no damage on the clamps or safety cables before installation.
2.
The clamp is mounted on the chassis of the fixture. Horizontally insert the clamp into the mounting holes of the chassis.
Fasten the clamp tightly by a 1/4 turn clockwise. Fix another clamp in the same way.
3.
Check if pan is unlocked before connecting the unit to AC power.
